Site Information

CONNECT WITH US

 Loading... Please wait...
(845) 524-3586
  • Monday through Friday 8:00am to 5:00pm EST
  • AMP1A-LP WOHLER TECHNOLOGIES MONITOR PANEL: analog audio (Used)

    • Image 1
    • Image 2
    • Image 3
    • Image 4
    • Image 5
    • Image 6

    AMP1A-LP WOHLER TECHNOLOGIES MONITOR PANEL: analog audio (Used)

    $80.00
    SKU:
    100-1628600
    Weight:
    14.00 LBS
    Current Stock:
    1
    Quantity:

    Product Description

    Item Condition:   Used     

    MFR Part #: Wohler Technologies AMP1A-LP

    Unit of Measure: Each

    Details/Specifications: General Specifications:           

    Input impedance:           

       200KΩ (Ohm) balanced           

       40KΩ (Ohm) unbalanced, minimum            

    Input Level for Maximum Output (Volume Full On):           

       0 dBv balanced           

       -10 dB unbalanced            

    Input Overload:           

       +26 dBv balanced           

       +14 dBv unbalanced           

    Peak Acoustic Output (@ 2 ft.): 98 dB SPL       

    Response, Sixth Octave: 80 Hz – 16 kHz &plusm; 7 dB(-10 dB @ 50 Hz, 22 kHZ)            

    Power output           

    RMS Each Side: 10 W transient / 5 W continuous       

    RMS Bass: 20 W transient / 10 W continuous       

    Distortion, Electrical: Less than 0.15% at any level below    limit threshold   

    Distortion, Acoustic: 8% or less at worst case frequencies above 180 Hz including cabinet resonance; typically less than 2%

    Hum and Noise: Better than -68 dB below full output       

    Magnetic Shielding: Less than 1 Gauss any adjacent surface   

    Input Connectors:

       Balanced: XLR       

       Unbalanced: RCA phono

    Power Consumption (Average Maximum): 35 W       

    AC Mains input: 100-240VAC, 50-60 Hz           

    Level Meter Specifications (-LP)           

    Level Calibration: -6, 0, +4, +8 dBv       

    Frequency Response: 20 Hz to 18 kHz (&plusm;0.5 dB)       

    Level Meter Type: 10-segment tri-color LED bargraph display   

    LED Color: Tricolor (red, amber, green)       

    Metering Range: 23 dB       

    Display Modes: VU or PPM, Selectable            

    VU Characteristics           

       Rise Time: 300 ms to 99% of full indication       

       Decay Time: 300 ms            

    PPM Characteristics           

       Attack Time: 10 ms       

       Decay Time: 2 seconds, 0 to -20 dB

    All parts in working order. Signs of wear only. Came from a working Environment. 

    Find Similar Products by Category